Product ID:SCOTCHWELD 1838A ADHESIVE GREEN (PT A)
MSDS Date:01/01/1987
FSC:8040
NIIN:00-916-8534
Kit Part:Y
MSDS Number: BFWHS

Emergency Phone: 612-733-1110 OP55

Cage: 04963

Telephone: 800-364-3577/651-737-6501(24 HOURS)

Cage: 04963

POLYAMIDE RESIN

Fraction By Weight: 81.0%

PIGMENTS & FILLERS

Fraction By Weight: 19.0%

Effects of Overexposure:EYE:SEVERE IRRT DIRECT CONTACT.SKN:MOD IRRT
POSS SENSITIZATION.INH:NO SOLVENT VAP.INGES:LOW TOX

First Aid:EYE:FLUSH 10 MIN W/WATER,CALL PHYS.SKN:WASH THOROUGHLY SOAP &
WATER. INHL:PROVIDE FRESH AIR.INGEST:NO ACTION NEEDED.

Extinguishing Media:CO*2, FOAM, DRY CHEMICALS
Fire Fighting Procedures:USE SCBA WHEN FIGHTING FIRES INVOLVING THIS
MATERIAL.
Unusual Fire/Explosion Hazard:NONE

Spill Release Procedures:OBSERVE ALL PRECAUTIONS.VENTILATE CONFINED
AREAS. COLLECT SPILLAGE & PLACE IN APPROVED CONTAINER.

Handling and Storage Precautions:USE ONLY IN WELL VENTILATED AREAS.
AVOID INHL DUST. AVOID CONTACT WITH EYES & SKIN. WASH CONTAMINATED
CLOTHING BEFORE REUSE.
Other Precautions:LAUNDER CONTAM CLOTHING BEFORE REUSE

Respiratory Protection:USE DUST MASK WHEN SAWING OR GRINDING CURED
RESIN.
Ventilation:VENT CURING OVENS TO OUTDOORS.PROVIDE LOC EXH IN CONF AREAS
Protective Gloves:USE IMPERVIOUS
Eye Protection:USE SAFETY GLASSES
Other Protective Equipment:NONE
Supplemental Safety and Health
PART A OF TWO PART SCOTCHWELD 1838B/A EPOXY ADHESIVE (GREEN) KIT.UPDATE
PER 3M MSDS 1NOV85 (OSHA) DOC# 1031400. 3M GENERIC ID# IS
62-1839-XXXX-X.FORMER P/N:SCOTCHWELD EC1838A.

HCC:N1
Spec Gravity:0.95
Viscosity:PASTE
Solubility in Water:NIL
Appearance and Odor:GREEN VISCOUS PASTE WITH LITTLE ODOR
Percent Volatiles by Volume:0

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:POSS CO,CO*2, N DECOMP PRODUCTS WHEN
EXP EXCESS HEAT,FLAME

Waste Disposal Methods:CURED RESIN: DISPOSE IN APPROVED LANDFILL OR
INCINERATE PER REGS. UNCURED WASTES: INCINERATE IN APPROVED
DISPOSAL FACILITY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.